نوار کناری
برد تستر قطعات LCR-T9
825,000تومان
کد محصول: 3030
موجودی در انبار
تعداد بازدید 1222 بازدید
دسته بندی هاسبد خریدحساب کاربریجستجومشاهده های اخیر
همه دسته بندی ها×
- برد رزبری پای - RASPBERRY PI
- بردهای کاربردی تحت سیستم عامل
- بردهای کاربردی صنعتی
- تجهیزات الکترونیک
- تجهیزات جانبی
- تغذیه سوئیچینگ صنعتی-آداپتور-منبع تغذیه
- جعبه - کیس های مدار و برد
- دستگاه کنترل پیامک
- ماژول ها
- ISM Band
- LCD
- درایور موتور
- دوربین
- ماژول اثر انگشت
- ماژول دما و رطوبت
- ماژول سنسور گاز
- ماژول های GSM/GPS/GPRS
- ماژول های RFID
- ماژول های آلتراسونیک
- ماژول های بلوتوث
- ماژول های تایمر و پالس
- ماژول های تغذیه و ولتاژ
- ماژول های شبکه و WIFI
- ماژول های شتاب سنج و ژیروسکوپ
- ماژول های صوتی و آمپلی فایر
- ماژول های فرستنده و گیرنده
- ماژول های فشار
- ماژول های مبدل
- ماژول های پزشکی و ضربان قلب
- ماژول های کاربردی
- ماژول پرینتر
- موتورها
- پروگرامرها
- کتاب های آموزشی و کاربردی
- کیت های آموزشی
- بردهای آموزشی ARM , AVR , PIC , FPGA
- روباتیک
- آردوینو
- سنسورها
- LED
- ریموت و کنترل کننده های صنعتی و کاربردی
- آنتن ها
- قطعات پروازی و ربات های پرنده
سبد خرید×
سبد خرید شما خالی است !
جستجو×
محصولاتی که بازدید کرده اید.×
توضیحات محصول
برد تستر قطعات LCR-T9
Description:
LCR-T9 is a multi-function tester with TFT graphic display. It can automatically measure NPN and PNP transistors, N-channel and P-channel FETs, diodes (including double diodes), resistance (including potentiometers), inductance, capacitance, thyristors, batteries (0.1-4.5V) and other components. With automatic calibration function. The measurement result adopts TFT graphic display, one-key operation, automatic shutdown (the shutdown time can be set, dual power supply mode, lithium battery voltage detection, support for Chinese and English bilingual, simple SMD component test area, external test port, internal system battery voltage detection.
Features:
1. The measurement result adopts TFT graphic display
2. Automatic shutdown (shutdown time can be set)
3. Dual power supply mode
4. Support Chinese and English bilingual
5. Internal system battery voltage detection
Specification:
Model: LCR-T9
Power supply voltage: DC9-12V (The external power interface is a DC 5.5V interface)
Current: ?500mA
Battery model: 6F22 (9V/300mAh square carbon dry battery, not included)
Note:
The charging input voltage is up to 12V, please do not use overvoltage, otherwise the tester will be damaged!
Choose one of battery and power supply. They cannot be connected at the same time, otherwise it will cause the battery to explode and burn.
Automatic shutdown after timeout:
When the component test is completed and the automatic shutdown time is reached, the tester automatically shuts down.
Manual shutdown:
In any state, long press the multi-function button to force the shutdown, including when the component is being measured.
The multi-function tester can automatically identify the component and pin arrangement, and the range can be automatically switched.